Zone 1 is the area above the bath or shower to a height of 2 25m from the floor.
Bathroom lighting zones 1 and 2.
In addition it is good practice to consider the area around a wash basin within a 60cm radius of any tap to be considered as zone 2.
If the fitting is 240v a 30ma residual current device rcd must also be used to protect the circuit in this zone.
This is the area within a bath tub only 12v selv safety extra low voltage equipment can be used.
Zone 2 is an area stretching 0 6m outside the perimeter of the bath and to a height of 2 25m from the floor.
It s also worth noting that most shower lights are rated at ip65 in any case.
A range of bathroom lighting including zone 1 2 3 lights rated for use in different areas of the bathroom.
0 1 2 and 3.
If the fitting uses a 240v supply a 30ma residual current device rcd must also be used to protect the.
Zone 0 bathroom lights are for the inside of the bath or shower itself.
Zone 3 is.
Zone 0 this zone requires a minimum of ipx7.
In these bathroom zones an ip rating of at least ip44 is required.
Zone 1 is the area above the bath or shower tray to a height of 2 25m from the floor.
Any fitting used in this zone must be low voltage max 12v and be rated at least ip67 which is total immersion proof.
Zone 2 same as above requires a minimum of ipx4.
The diagram shows a bathroom split into four clear zones.
Vanity light bars optimize the light in your bathroom and come in a variety of multilight styles from 1 light sconces up to 8 light bars.
The three bathroom zones are.
Zone 1 requires a minimum of ipx4.
The lighting companies entire collection of bathroom lighting containing modern and traditional ceiling lights wall lights illuminated mirrors led energy saving lights as well as modern spot lights and bathroom chandeliers all our bathroom lighting is ip44 rated or higher making them safe for bathrooms the bathroom is divided into zones 0 1 2 and 3 and bathroom light fittings are ip.
This is the area directly above a bath and within a shower cubicle.
In this zone a minimum rating of ip44 is required.
Zone 1 bathroom lights can be used in the area above the bath to a height of 2.
In this zone a minimum rating of ip45 is required but it is generally accepted that ip65 is to be used.
Zone 2 is an area stretching 0 6m outside the perimeter of the bath and to a height of 2 25m from the floor.
Any fitting used in this zone must have a minimum rating of ipx4 which means it is protected against water spray from all directions.
Zone 1 for a shower room is 2 25m from the finished floor level or the height of the fixed shower head from the finished floor level if more than 2 25m and the width of the shower basin.
Zone 1 is for use inside a shower cubicle and around a bath and has a minimum ip rating of ip65 zone 2 is for use on the wall up to a height of 2 25m again having a minimum ip rating of ip44.
